CPC40912 Certificate IV in Plumbing and Services

CSQ Funding information for CPC40912 Certificate IV Plumbing & Services Gas Units

The Post Gas Work interim units as offered by Bizmatrix are designed to enable participants who successfully complete the Certificate III in Gas Fitting and have held an interim gas licence, to apply for their open first year Gas Work Licence.

Requirements

This course is open to those who have completed the CPC32713 Certificate III in Gas Fitting or Gas Work Licence (Interim) post 12 months application or in progress with a Restricted Gas Licence.

Delivery mode

Students will be required to complete Service Type A and Carry Out Work Based Risk Controls practical training. There is no practical requirement for Estimate and Cost Work/Design and Size units, therefore books will be sent out by correspondence.

Enquire

DOWNLOAD PDF

AT A GLANCE

Requirements	Yes - Interim gas licence
Face to face training	Six days for Service Type A Gas Unit only
E-Learning?	Yes - For Carry Out Work Based Risk Control Processes, Estimate and Cost Work, Design and Size Consumer Gas Installations units only
Nationally recognised?	Yes

A Type A gas appliance is an appliance where a gas certified scheme exists – where there is a program to test and certify the same type of appliance for mass production, mainly commercial and domestic gas appliances.

Gas deep fryers, six burner gas ranges, gas ovens, gas combi-ovens, gas steamers, salamanders, churrasco, paella gas grills, BBQ grills.
Display flames, gas fired bain-marie, salamanders, teppanyaki grills, tandoor cookers, naan bread cookers, large brat pans, gas steam jacketed cookers, steaming ovens and gas fired toaster ovens

Gas cookers, gas cooktops, domestic BBQ, gas stoves, gas hot water systems like Bosch Hot Water, Rheem gas hot water units, Rinnai Hot Water units.

Are you an existing worker in the building and construction industry looking to learn new and important skills that will help you to further your career in construction? Our Short Courses program could be for you.

The Short Courses program provides funding to assist with upskilling and cross skilling existing workers in the building and construction industry. Short Courses are individual competencies and skills sets designed to provide flexible solutions to workers wanting to update their skills and knowledge in specific and targeted areas.

We will assess your eligibility for funding and will advise you of the costs you will need to meet.

Participants under this agreement must meet the following criteria:

Short Course Code	Short Course Title	Amount Funded Per Participant
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	$240.00
CPCPCM4012A	Estimate and Cost Work	$180.00
CPCPGS4011C	Design and size consumer gas installations	$480.00
CPCPGS4022A	Service Type A Gas appliances	$750.00
UEENEEP010A	Disconnect – reconnect appliances connected to low voltage installation wiring	$480.00
UEENEEP013A	Disconnect – reconnect control devices connected to low voltage installation wiring	$480.00
UEENEEP014A	Disconnect – reconnect water heaters connected to low voltage installation wiring	$480.00
UEENEEP016A	Locate and rectify faults in low voltage appliances using set procedures	$150.00
UEENEEP018A	Locate and rectify faults in low voltage control devices using set procedures	$150.00
UEENEEP019A	Locate and rectify faults in low voltage water heaters using set procedures	$150.00
UEENEEP024A	Attach cords and plugs to electrical equipment for connection to single phase 230 Volt supply	$240.00
UEENEEP025A	Attach cords and cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c supply	$150.00
UEENEEP026A	Conduct in-service safety testing of electrical cord connected equipment and cord assemblies	$150.00
UETTDRRF06B	Perform rescue from a live LV panel	$50.00

UNITS ON OFFER

CPCPCM4011A Carry out work-based risk control processes
CPCPGS4022A Service Type A gas appliances
CPCPCM4012A Estimate and cost work
CPCPGS4011C Design and size consumer gas installations

Note: No early bird discount is offered with the Post Gas Licence course. Students on sign up need to pay an initial deposit to reserve their spot and if course total is under $1,500 they must pay total fee.

Students completing CPCPGS4022A Service Type A gas appliances must attend six days of training, and all other gas units must be completed by correspondence within 6 months of sign up.
If a student signs up to onsite training then fails to attend practical training after confirmation of dates, they must re-enrol requiring an extra $700 payment to be made due to cancellation and re-enrolment process.

PRICING

CPCPGS4022A Service Type A Gas Appliances $1,990 GST free
CPCPCM4011A Carry out work-based risk control processes $480 GST free

Price for both units: $2,400 GST free

CPCPGS4022A Service Type A Gas Appliances $1,990 GST free
CPCPCM4011A Carry out work-based risk control processes $480 GST free
CPCPCM4012A Estimate and Cost Work $480 GST free (eLearning only )
CPCPGS4011C Design and size consumer gas installations $480 GST free (eLearning only)

All four units: $3,200 GST free

$1,990

6 Days

SERVICE TYPE A GAS

$2,400

6 Days

SERVICE TYPE A + CARRY OUT WORK

$3,200

6 Days

ALL 4 UNITS

CPCPCM4012A Estimate and Cost Work $480 GST free
CPCPGS4011C Design and size consumer gas installations $480 GST free

Delivery and assessment- E-learning online training and assessment.
Enrolments open

eLearning –Estimate/Size units units: $960 GST free

CPCPCM4012A Estimate and Cost Work $900 GST free
CPCPGS4011C Design and size consumer gas installations $900 GST free

Delivery and assessment- E-learning online training and assessment Plus +
Face to Face delivery (2) Two Days
Enrolments open

Blended- Estimate/Size units units: $1,800 GST free

$480

Single unit

E-LEARNING ONLY

$960

Estimate and cost work
Design and size

ONLINE ONLY

$1,800

Estimate and cost work
Design and size

E-Learn + 2 Days

Please note

The below booking prices is a selection for all four (4) units.

Enquire

TRAINING DATES

Post gas units – (2) units – ( 6 Days face to face training)

CPCPGS4022A Service Type A gas appliances
CPCPCM4011A Carry out work based risk assessments
(6 days practical attendance)
PRGL-11-2017 post gas course 14th,15th,16th & 20th,21st,23rd November 2017 Brendale Brisbane (New 6 day course)

Post gas units – (2) units – ( e Learning /Correspondence only )

CPCPCM4012A Estimate and Cost Work –
CPCPGS4011C Design and Size Consumer Gas installations

Note- Separate enrolments required for the 4 units -Maximum price for four units $3,200 for these options-

There is an option for the Estimate and cost/ Design size units to be completed face to face as per the next option

Name	Date	Time	Location	Available Spaces	Cost
PGL-5-2019: JULY/AUG/SEPT 2019 : Post Gas course - CERT IV. Service Type A gas Appliances Risk assessment (7) Days face to face	30, 31 July; 1 Aug; - 4, 5, 9 & 10 Sept 2019	07:30 am - 04:00 pm	Bizmatrix BRENDALE Training Rooms	3	$2,400.00	Enrol Now
PGL-6-2019: SEPT/OCT: Post Gas course - CERT IV. Service Type A gas Appliances Risk assessment (7) Days face to face	24-27 Sept; 8-10 Oct 2019	07:30 am - 04:00 pm	Bizmatrix BRENDALE Training Rooms	10	$2,400.00	Enrol Now
PGL-7-2019: OCT: Post Gas course - CERT IV. Service Type A gas Appliances Risk assessment (7) Days face to face	15-18; 21, 24 & 25 October 2019	07:30 am - 04:00 pm	Bizmatrix BRENDALE Training Rooms	10	$2,400.00	Enrol Now
PGL-8-2019: NOV: Post Gas course - CERT IV. Service Type A gas Appliances Risk assessment (7) Days face to face	12-15; 18-20 November 2019	07:30 am - 04:00 pm	Bizmatrix BRENDALE Training Rooms	10	$2,400.00	Enrol Now
PGL-9-2019: DEC: Post Gas course - CERT IV. Service Type A gas Appliances Risk assessment (7) Days face to face	3-6; 11-13 December 2019	07:30 am - 04:00 pm	Bizmatrix BRENDALE Training Rooms	10	$2,400.00	Enrol Now

Name	Date	Time	Location	Available Spaces	Cost
PGL-SZ-CST-2019_eLearn only Post Gas course-Certificate IV units- SIZE and Cost/estimate-CORRESPONDENCE ONLY)	Online Due by 31 December 2019	07:30 am - 05:00 pm	eLearn only-Design size-Estimate/cost	19	$960.00	Enrol Now
PGL-SZ-CST-2019_eLearn only Post Gas course-Certificate IV units- SIZE and Cost/estimate-CORRESPONDENCE ONLY)	Online or correspondence - only OPEN NOW	07:30 am - 05:00 pm	eLearn only-Design size-Estimate/cost	5	$960.00	Enrol Now

In Class Training Units

Post gas units – 2 units – CPCPCM4012A Estimate and Cost Work – CPCPGS4011C Design and Size Consumer Gas installations

NEW (2) Two days Face to face + eLearning blended

PRGL-EST-SIZE-2017 post gas course – Enrolments Open- eLearning then face to face on the

Two day in class session :

Session One-Tuesday 24th , Wednesday 25th October 2017
Session Two- Tuesday 12th , Wednesday 13th December 2017

Dates for 2018 to be advised

Name	Date	Time	Location	Available Spaces	Cost

Enquire

CSQ funding for Certificate IV Plumbing & Services Gas Units

Enquire now

CSQ Funding information for CPC40912 Certificate IV Plumbing & Services Gas Units

AT A GLANCE

SCOPE OF WORK

UNITS ON OFFER

PRICING

TRAINING DATES

Post gas units – (2) units – ( 6 Days face to face training)

Post gas units – (2) units – ( e Learning /Correspondence only )

In Class Training Units

Two day in class session :

Customer Care

Gas

Electrical

Training