Restricted Electrical – Type B Gas Students

Training in Brisbane

RESTRICTED ELECTRICAL & TYPE B GAS BLENDED

This restricted electrical training is linked and blended with the Type B gas course. With this approach Bizmatrix has designed the Restricted Electrical course to be connected to the Type B gas course training to reduce the need of external logbooks and training permits.

Therefore the restricted electrical training is completed internally with the simulated Type B gas appliances and throughout the face to face restricted electrical sessions.

At A Glance

Requirements Enrolled in the Type B Gas Course
Requirements Enrolled in the Type B Gas Course Face to face training 5 days
Online 20-30hrs
External Logbooks Not required
Restricted Electrical Licence outcome? Yes- 230 Vac | Type B gas appliances only
Nationally recognised? Yes

Who Is This Course Designed For?

The Restricted Electrical Licence Course blended with Type B Gas training is designed for those looking to up-skill and gain a Type B gas qualification with a Restricted Electrical Licence in relation to the Type B skill set.

Additional to provide the electrical licensing requirement to enable the participant to be issued with a Type B Gas Statement of Attainment after the successful completion of the Type B gas course.

Visit our Type B Gas Course for further information.

Course Requirements:

There are no pre-requisites for this training program due the blended option available. This enables you to complete restricted electrical training and obtain a license using Type B gas qualification.

Course delivery

The course delivery time is fixed. Each program has a blended delivery with online components which consists of approximately 20-30hrs of online theory/assessments and 5 days of comprehensive face to face (F2F) practical restricted electrical training on site at Bizmatrix Training Centre.

You must complete the online training within 2-3 months of enrolling and attend the practical F2F training within a month after completing the online training. The online and F2F training must be completed not prior to 1 month and within 6 months of enrolling.

We also offer tailored training, where the training maybe completed onsite at your work.

You would be required to complete the online training and assessment before attending the F2F practical training and assessment days. For the logbook students, the logbook is to be completed after the attendance of the practical F2F training.

No log books are required for this course as we have blended the training with the Type B gas course.

The online training and assessment is to under pin your knowledge to assist you with learning the theory and doing the theory assessments before attending the F2F practical.

Face to Face practical Days

  • Day 1 – WHS & Test and Tag day
  • Day 2 – Disconnect & Reconnect
  • Day 3 – Disconnect & Reconnect
  • Day 4 – Disconnect & Reconnect/Plugs and Cords
  • Day 5 – Locate rectify faults.

If you would like extra units, you are then required to apply for a restricted electrical permit to be eligible for it. We recommend you complete and achieve the REL and Type B gas course before considering any further units.

Before you book a course:

  • Understand the online learning and assessment commences on enrolment.
  • Plan your study periods and attendance to the regular virtual online classes
  • Allow at least 2-4 weeks to complete the online learning & assessments.
  • Understand all online learning must be completed prior to the face to face (F2F) practical training
  • Check the due dates for the online learning and the assessments

Why Choose Bizmatrix?

  1. Highly Experienced Educators: Our team boasts over 40 years of combined experience in gas and electrical training. You benefit from extensive knowledge that exceeds Type B gas requirements.
  2. Continuous Improvement: We are dedicated to staying ahead of industry trends and evolving demands. Our courses are regularly updated to meet the changing needs of the field.
  3. Tailored Course Content: We tailor the course to meet the requirements of each student including any local state, territory or country regulatory variations.
  4. Alignment with Industry Standards: We stay informed about industry standards by actively listening to feedback from professionals and collaborating with regulatory bodies and other industry leaders.
  5. Elevated Standards: Our aim is to transform you into a technician capable of handling any Type B gas appliance, surpassing the traditional roles of plumbers, gas fitters, or electricians.
  6. Proven Track Record: Bizmatrix has been delivering the Type B Gas course for over 14 years and, as our students confirm, we answer all of your questions and ensure you qualify with superior skills.
  7. Empowering Students: We strive to impart as much of our experience as possible, empowering you to become a better, safer, and more professional technician.
  8. Small Class Sizes: We conduct small classes to ensure students get individual attention and support.
  9. Before and After Class Support: We help our students before and after they take our courses to ensure they have everything in place and, where necessary, help with permit/licence applications.
  10. High Levels of Safety and Compliance: We instil the correct methods of a systematic approach to fault finding with gas and electrical controls, drawing from our industrial and commercial knowledge throughout your learning journey.

At Bizmatrix, we’re not just about providing training; we’re about setting you up for long-term success in the gas and electrical industry.

Units Available

Quick Details & Information

Unsure of Eligibility?

We realise that with complicated and similar looking unit and course numbers, it’s easy to get mixed up about what’s required.

If you are unsure, we recommend giving us a quick call.

We can talk through:

  • The options that are specific to you
  • Make sure that everything is in place prior to registering for the Type B Gas course.​

What's involved in the course?

  • UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
  • UEERL0003 Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
  • UEERL0004 Disconnect – reconnect electrical equipment connected to low voltage (LV) installation wiring
  • UEERL0005 Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
  • UEERL0001 Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply.

When Do We Hold Courses

The Bizmatrix Restricted Electrical and Type B Gas Blended course is held throughout the year.

We only publish online the dates of the forthcoming course. Click the button below to see those dates.

If these dates are too early / don’t suit you, or you suspect you will need to have more time to complete the pre-requisites before commencing the Type B Course,  please get in contact.

We can work with you to establish a schedule that suits.

Where Do We Hold Courses?

Face-to-face sessions at our Brendale Training Centre, Brisbane.

Mobile Training Centre: on-demand training in other locations if sufficient numbers.

Pricing

See below for the pricing details.

Still Unsure? Contact Our Team

Bizmatrix is a family-run business with decades working in training.

We care about the quality of everything we do, from start to finish. As well as a great team of experienced trainers, our admin people are helpful and knowledgeable.

We’re quickly available on the phone, and don’t send you in circles! Call us, and you’ll instantly know why we say this with confidence.

Read what our clients say

Rated 5 out of 5

Hayden Phillips

“Had such a great week, can’t thank the teachers enough for their insight into our trade. amazing real people.”

Rated 5 out of 5

Brendon Smith

"Couldn’t be happier. Extremely informative. Educators know there stuff and more, both online and practical aspects. After completing the training course, I feel much more confident and professional. Highly recommend "

Rated 5 out of 5

Clayton Zanella

“Awesome level of knowledge from the trainers and really good, relevant course content. Very happy."

Course Outcomes

All course outcomes can be viewed via both the Restricted Electrical Course and Type B Gas Course pages.

Pricing

Restricted Electrical Course

The Restricted Electrical Licence Course blended with Type B Gas training is designed for those looking to up-skill and gain a Type B gas qualification with a Restricted Electrical Licence in relation to the Type B skill set.

Restricted Electrical Course

$2,280 GST FREE

20-30hrs Online + 5 Days Face-to-Face Practical

Course Dates

If you want to make an enquiry, please click “Enquire Now” above.

Class Name Course Dates

Online due dates

Class Times

 
Training Locations Available Spaces

Pricing -

To be confirmed

 Enrolments

    or more information  

 
REL-1-BNE-2027 Restricted Electrical eLearning due before:11/01/2027   Face-to-Face Dates: 11 Jan 2027 - 15 Jan 2027 eLearning due before:11/01/2027

Class Time: 07:30 am ---- 03:30 pm

BZ Training Centre: Unit 54 - Level 1 9 General Pricing $2,280.00   " Enquire Now " Button above 
REL-2-BNE-2027 Restricted Electrical eLearning due before:01/02/2027   Face-to-Face Dates: 1 - 5 February 2027 eLearning due before:01/02/2027

Class Time: 07:30 am ---- 03:30 pm

BZ Training Centre: Unit 54 - Level 1 10 General Pricing $2,280.00   " Enquire Now " Button above 
REL-3-BNE-2027 Restricted Electrical eLearning due before:08/02/2027   Face-to-Face Dates: 8 - 12 February 2027 eLearning due before:08/02/2027

Class Time: 07:30 am ---- 03:30 pm

BZ Training Centre: Unit 54 - Level 1 10 General Pricing $2,280.00   " Enquire Now " Button above 
REL-4-BNE-2027 Restricted Electrical eLearning due before:22/02/2027   Face-to-Face Dates: 22 - 26 February 2027 eLearning due before:22/02/2027

Class Time: 07:30 am ---- 03:30 pm

BZ Training Centre: Unit 54 - Level 1 10 General Pricing $2,280.00   " Enquire Now " Button above 
REL-5-BNE-2027 Restricted Electrical eLearning due before:08/03/2027   Face-to-Face Dates: 8 - 12 March 2027 eLearning due before:08/03/2027

Class Time: 07:30 am ---- 03:30 pm

BZ Training Centre: Unit 54 - Level 1 10 General Pricing $2,280.00   " Enquire Now " Button above 
REL-6-BNE-2027 Restricted Electrical eLearning due before:15/03/2027   Face-to-Face Dates: 15 - 19 March 2027 eLearning due before:15/03/2027

Class Time: 07:30 am ---- 03:30 pm

BZ Training Centre: Unit 54 - Level 1 10 General Pricing $2,280.00   " Enquire Now " Button above 

We work with

Scroll to Top