Restricted Electrical Courserestricted-electrical

The Restricted Electrical Course is for those wanting to complete minor electrical work (50 VAC – 1000 VAC)  inline with their current trade.

That means, disconnect and reconnect, locate and rectify, fault find or test and tag electrical appliances used for your current trade.

The training program combines both theoretical learning with practical training within a simulated environment.

There are so many unit combinations when it comes to completing the Restricted Electrical Course. Which means that the timeframe varies.

However, in general, you can expect the learning program to last between 6 and 10 days.

The first half of the training will be made up of online theory. Then once completed, you will be required to complete on-site training at our facility.

Once this part of the training is complete, and students have passed the assessment, they will be eligible to complete an application with the ESO in order to obtain the Restricted Electrical License.  

Note: This course is NOT for those wanting to complete a path to become an electrician. 

Get Course INFO

AT A GLANCE

RequirementsYes, Electrical Permit
Practical training3 - 7 days
E-LearningThree days
Correspondence?No
Nationally recognised?Yes

RESTRICTED ELECTRICAL IN DETAL

  • Are you eligible?

    You have a current eligible trade licence or qualification ( Certificate III level).

    Or have evidence of a minimum of 3 years unstructured industry experience 

    There is a need to do incidental electrical work for my job. This will be limited by the need and the listed eligibility scope….


    Follow the below form carefully and complete your Application to the Electrical Safety Office.

    You are eligible to apply for the Restricted Electrical Licence Permit. You will need a copy of the permit before you can commence training.

    Form 21 button

  • I don't have a trade

    You cannot proceed unless you do a Certificate III Gas Licence or are completing the Type B Gas Course with Restricted Electrical blended course.

    Other: I have three years of unstructured experience.

    Only those with a base trade or calling as listed here a Full guide by the Electrical safety office on how to apply for an electrical licence are eligible otherwise if you have 3 years or more of unstructured experience. 

    These units are selected from the UEE30811 Certificate III in Electrotechnology Electrician.

  • Course Structure

    Phase oneE-learning online components approximately 3-4 days of online theory. You are required to complete the online training within 3 months of signing up to the course.
    Phase twoOnce E-Learning is complete, you will be required to complete 3-6 days of comprehensive practical training at Bizmatrix Training Centre, Brendale.

    You will be required to attend practical within a month after completing the online training.

    Phase threePractical experience logbook to be completed after training.

    If you do not have a supervisor to sign you off, Bizmatrix can offer onsite practical experience at an extra cost (not included in course fees).

    Information and registration sheet available when you register or follow this link – Bizmatrix restricted electrical training.

    The Bizmatrix Restricted Electrical

    Course dates &  enrolments:

    First step -enrol The courses commence soon after enrolment :

    Step 1- complete the eLearning education and assessments ( approximately 20-30 hrs)

    Step 2- complete the face to face practical requirement- ( 3-7 days  depending on units)

    Step 3- Complete the logbooks in the workplace – (within permit period – min 3 months max 12 months)

    Note the practical weeks are listed below, there are allocated days every month.

  • Units Available

    • UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
    • UEENEEP010A Disconnect – reconnect appliances connected to low voltage installation wiring
    • UEENEEP012A Disconnect – reconnect composite appliances connected to low voltage installation wiring
    • UEENEEP013A Disconnect – reconnect control devices connected to low voltage installation wiring
    • UEENEEP014A Disconnect – reconnect water heaters connected to low voltage installation wiring
    • UEENEEP015A Disconnect – reconnect motors connected to low voltage installation wiring
    • UEENEEP016A Locate and rectify faults in low voltage appliances using set procedures
    • UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures
    • UEENEEP018A Locate and rectify faults in low voltage control devices using set procedures
    • UEENEEP019A Locate and rectify faults in low voltage water heaters using set procedures
    • UEENEEP020A Locate and rectify faults in low voltage motors using set procedures
    • UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
    • UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase
      230 Volt supply
    • UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply

OUTCOME

Students with a permit, who complete the Restricted Electrical Course will be eligible to apply for the Restricted Electrical Licence through the ESO. Once the licence is obtained, you will be able to complete the restricted electrical work in line with your trade.

The licence will state the maximum voltage and specific appliances you are eligible to work on. For example, plumbers are only able to work on hot water systems, while gas fitters are only able to work on gas appliances.

Please note: Electrical online theory must be complete within three months after sign up date, and students must book face to face training dates on sign up. If you fail to attend this training after sign up (within 3 months) then you must pay a fee to rebook course $700, as once student confirms attendance, dates cannot be changed.

DOWNLOAD PDFMore Course Info

PRICING STRUCTURE

All of Bizmatrix Restricted Electrical Courses come with two extra units as part of the total course fee:

> UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

> UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

The below costs include all books, facilities and course materials except for logbook experience, which is to be completed within the student’s current workplace. If you require insitutional logbook training, Bizmatrix can provide this at an extra daily rate.

Plumber - Hot water 250 VAC Skill Set

Training Permit: Required (Apply before training)
Employer support letter: Not required
Licence outcome: Water heaters limited to 250Vac

UEENEEE101A – Apply OHS / WHS
UEENEEP026A – Conduct in service testing (Test &Tag)
UEENEEP014A – Disconnect & Reconnect
UEENEEP019A – Locate rectify faults
UEENEEP024A – Plugs cords 230Vac

E-learning + 5 days face to face training
(3) Three logbooks required –Training Permit required

Total Cost: $2,295 GST FREE

Type B gas Restricted Electrical course Blended. No logbooks.

Type B gas Restricted Electrical course Blended. No logbooks.
Online e-learning SessionsPre- Face to face
1-Test and Tag – WHS
• UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies
2-Disconnect ReconnectUEENEEP010A Disconnect – reconnect appliances connected to low voltage installation wiring
3-Locate RectifyUEENEEP016A Locate and rectify faults in low voltage appliances using set procedures
4-Plugs & Cords 250 VacUEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase
Logbooks Required: 0Not required ( Blended with Type B gas course )
Licence outcomeGas appliances/equipment
Total Days face to faceFive
Training PermitNot required
Employer support letterRequired on application of licence
Course Fees$1,995
OPTION – Please note pricing is determined by the number of units on your Restricted Electrical Permit
PRICESELECTION CODE FOR ENROLLMENT FORM
TEST & TAG ONE DAY COURSE – No Permit required!
Test & Tag – Conduct in Service Testing E-learning and 4 hrs PracticalSign up for the Test and Tag Training course or read more here.
$495 GST FREE Selection 1
TYPE B GAS FITTER SKILL SET
For those completing Type B training, details can be found here.
$1995 GST FREE Selection 2
No Call of trade 250 VAC

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

UEENEEP012A Disconnect / reconnect composite appliances connected to low voltage installation wiring (as pre-requisite to UEENEEP017A)

UEENEEP017A Locate and rectify faults in low voltage composite appliances using set procedures

UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase

$2,245 GST FREE Selection 3
Plumber – Hot water 250 Vac

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

UEENEEP014A Disconnect – reconnect water heaters connected to low voltage installation wiring

UEENEEP019A Locate and rectify faults in low voltage water heaters using set procedures

UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase

$2,295 GST FREESelection 4
Example: MECHANICAL FITTER or GAS FITTER / PLUMBER  SKILL SET  – Disconnect/Reconnect /Locate Rectify

  1. OHS- UEENEEE101A
  2. Test and Tag-UEENEEP026A
  3. Disconnect Reconnect-UEENEEP010A
  4.  Locate rectify faults up to 230Vac – UEENEEP016A  + Logbook
    Add Attach Cords and Plugs 230Vac $200- UEENEEP024A
$2,600 GST Free
+ $200 Option
 Selection 5
OTHER TRADES SKILL SET

  1. OHS     UEENEEE101A
  2. Test and Tag    UEENEEP026A
  3. Disconnect Reconnect up to 415Vac
  4. Locate rectify faults up to 415vac + Logbook
$2,900 GST Free

 

Selection 6
5. Add Attach Cords and Plugs 230Vac $200    UEENEEP024A+  $200 Option Selection 7
REFRIGERATION / AIR CONDITIONING SKILL SET

ALL UNITS LICENCE SELECTION – Restricted Electrical Licence
All Restricted Electrical Units- Electrical Permit + Log book
Test and Tag, Disconnect and Reconnect, Locate and Rectify, Attach Cords and Plugs up to 1000Vac or 1500V.dc

  1. OHS     UEENEEE101A
  2. Test and Tag    UEENEEP026A
  3. Disconnect Reconnect up to 415Vac UEENEEP010-15A +Logbook
  4. Locate rectify faults up to 415vac UEENEEP016-20 A+ Logbook
  5. Plugs and Cords 230Vac  UEENEEP024A  + Logbook
  6. Plugs and Cords 415 Vac UEENEEP025A  + Logbook

 

$3200 GST FreeSelection 8

RESTRICTED ELECTRICAL TRAINING DATES

Prices starting from $1995 - please refer to above table for specific pricing.

UNITS ON OFFER

NameDateTimeLocationAvailable SpacesStarting Cost
Restricted Electrical Course REL-5AP-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms REL-5AP-20206$1,995.00
Restricted Electrical Course REL-7-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-7-20209$1,995.00
Restricted Electrical Course REL-8-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-8-202010$1,995.00
Restricted Electrical Course REL-12-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-12-20209$1,995.00
Restricted Electrical Course REL-9-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-9-202010$1,995.00
Restricted Electrical Course REL-10-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-10-202010$1,995.00
Restricted Electrical Course REL-11-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-11-202010$1,995.00
Restricted Electrical Course REL-13-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-13-202010$1,995.00
Restricted Electrical Course REL-14-2020Online first-then Face to Face TBA07:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-14-202010$1,995.00
Restricted Electrical Course REL-15-20202 - 6 November 202007:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-15-202010$1,995.00
Restricted Electrical Course REL-16-202023 - 27 November 202007:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms - REL-16-202010$1,995.00
Restricted Electrical Course REL-17-20207 - 11 December 202007:30 am – 04:00 pmBizmatrix BRENDALE Training Rooms10$1,995.00
© Copyright 2017 Bizmatrix | Privacy Policy | Sitemap