Search
Close this search box.

Service Type A Gas Appliances – Full Course Details CPCPGS4022 (Victoria)

Course: CPCPGS4022 Service Type A Gas Appliances - Full Details

Course Requirements:

All  Victorian Applicants must hold a VBA Gas fitting class registration and/or licence.

The Units:

  • CPCPGS4022 –  Service Type A Gas Appliances
    • CPCPCM2043 – Carry out WHS requirements.
    • CPCPGS3053 – Disconnect & reconnect Type A gas appliances.

Course Content, Tools and Equipment:

The Bizmatrix Service Type A gas appliance course is designed from our years of experience with domestic, commercial and industrial Type A and Type B gas appliances, along with certification processes.

The right tools and test equipment

Each student has access to their individual toolbox with tools and test equipment needed for the duration of the course. The test equipment includes: 

  • Multi Meters for checking circuits, Clamp amp meters to check for stray current-
  • Micro amp meters for checking flame current.  
  • IR testers for earth continuity and insulation resistance megger testing 
  • Two manometers – U-tube and digital for checking gas pressure, leak testing and setting the correct burner pressure.
  • Electronic Gas leak detector – Pumpy pumpy for leak testing-
  • Room Co meters and Combustion analysers.
  • Specific specialist tools

Tuning burners and testing correct combustion

We will teach you how to:

  • Utilise the combustion triangle to confirm the correct balance and how to do combustion analysing, and Carbon monoxide measurement with an analyser.
  • Confirm the gas appliance is working safe, efficiently as designed and complies.
  • How to save the client to reduce their fuel usage (less CO fumes and dollars) by understanding the why and how to use the correct test equipment and processes to achieve the goal of less wasted energy, by calibrating the appliance checking the flue gases.

Gas basics to the next level Gas with controls

Following a systematic approach and our designed check sheets, that are in line with the standards and industry – we keep you on track to work through how to diagnose fault find control circuits, transformers, pressure switches and how to set a pressure switch:

  • 240 Vac Forced and induced draft combustion fans.
  • Checking heat exchange units and how to stop cracking.
  • Flame failure how to measure and diagnose issue with flame rods and ignition probes.
  • Ignition packs. Burner control.
  • Multi bloc gas valves.
  • Gas solenoid valves and fault-finding operation.
  • Thermocouples and thermopiles . Thermostatic controls, HI limit and control circuits.
  • Electrical safety: checking polarity, why there is stray current how to work safely.
  • Checking earth continuity.
  • Ohms law and PIV and VIR are your friends.
  • Converting the appliance- Natural to Propane vice versa.
  • Air Pressure switches- checking / setting.
  • Spillage, CO and combustion checks.
  • VBA and ESV compliance information and processes
  • Gas rates, injectors and aeration.
  • Open flued, room sealed appliances/ Ventilation. 

Develop you into a technician (Lift the standards)

We have a tried and proven formulae. For the past 30 + years our mantra has been to impart our knowledge as qualified / Licenced Type A / Type B Gas and Electrical trainers to create and mentor a Gas fitter or plumber / gas fitter or electrician into a dual and multi trade technician who can tackle any type of appliance in their scope.

We have a ‘go back-to-basics’ process and systematic approach to work on the complete appliance, confirming that the unit is installed correctly – the correct power, gas and install – before diagnoses.

Our approach is to never make assumptions, always looking to make it better and to lift the standards, and ensure students know the why we are doing each process.

The learning journey for Type A gas appliance servicing experience

We start with the theory online, to refresh and build up your knowledge then focus on the practical during the 7 days face-to-face.

Starting with the basics simulators and work through to variety of appliances with the forced and induced draft burners with ignition systems that are parallel across the range, from basic thermocouple / thermopile atmospheric burners to forced draft / inducted draft Woks, Ovens, Ducted heaters, Wall furnaces and water heaters.

Using check sheets, the manuals, and specifications to work through the complete process of diagnosing, checking electrical gas safety, calibrating, working through gas circuits, confirming the appliances operate correctly as designed and are compliant and safe / efficient.

Course Conclusion:

At the conclusion of the course, the successful participants will receive:

  • A Statement of attainment in recognition and conforming to the AQTF requirements with the nationally accredited units:
    • CPCPGS4022 Service Type A Gas appliances
    • CPCPCM2043 Carry out WHS requirements.
    • CPCPGS3053 Disconnect and reconnect Type A gas appliances.
  • A copy of to download and print (included in the fees) the Australian Standards:
    • AS/NZS 5601.Part 1- 2022 Gas Installations Part 1- general installations.
    • AS/NZS 5601.Part 2- LP gas installs in Caravan and boats for non-propulsive purposes.
    • AS4575 4575:2019 Gas Appliances Servicing of Type A appliances. Mandated and required in Victoria.
    • Other standards in the Bizmatrix Techstreet subscription portal access.
  • Greater skills and knowledge as a technician in Type A Gas Appliance Servicing, of gas appliances with electrical and electronic controls with forced and induced draft burners.
  • Be able to apply a systematic approach to:
    • Diagnose, fault find, disassemble – remedy – reassemble – test, verify and re-commission gas electrical appliances.
    • Correctly covert a Type A gas appliance from Natural to Propane and vice versa.
    • Identify and provide the correct documentation, completed check sheets to confirm compliance and safe operation:
      Ability to use the correct test equipment for electrical and gas testing including multi-meters, micro- amp meters, gas analysers and Carbon monoxide testers, medium pressure manometers.
  • Bizmatrix Learner technical manuals provided throughout the course, check sheet guides to assist in future processes.
  • The ability now to progress to the next stage, gaining further knowledge and skills in the field to then apply to complete the Victorian Building Authority (VBA ) Assessment to seek endorsement I the specialist class of Type A appliance servicing work.

Further Help

If you are looking for more information about this course or you have any questions, please call us, or click Enquire Now to use our course contact form. 

Pricing:

Melbourne training is a fixed price of $3,350. This includes the two pre-requisite units completed during the part 1 online training:

  • CPCPGS4022 – Service Type A Gas Appliances
  • CPCPCM2043 Carry Out WHS Requirements
  • CPCPGS3053 Disconnect & Reconnect Type A gas appliance

Please note our payment schedule

  • For Individuals, $1,500 to be paid on registration/commencement of course, balance to be paid by the commencement of 7 days face-to-face training.
  • Companies are required to make full payment on registration.

Melbourne Dates:

Class Name Course Dates

Online due dates

Class Times

 
Training Locations Available Spaces

Pricing -

To be confirmed

 Enrolments

    or more information  

 
MPGL-5-MEL-2024 Service Type A gas appliance CPCPGS4022 eLearning due before:19/06/2024   Face-to-Face Dates: 19-21 & 24-27 June 2024 eLearning due before:19/06/2024

Class Time: 07:30 am ---- 03:30 pm

Bizmatrix DI Campus (Carneigie Vic) 3163 4 General Pricing $3,350.00   " Enquire Now " Button above 
MPGL-6-MEL-2024 Service Type A gas appliance CPCPGS4022 eLearning due before:17/07/2024   Face-to-Face Dates: 17-19 & 22-25 July 2024 eLearning due before:17/07/2024

Class Time: 07:12 am ---- 03:30 pm

Bizmatrix DI Campus (Carneigie Vic) 3163 5 General Pricing $3,350.00   " Enquire Now " Button above 
MPGL-7-MEL-2024 Service Type A gas appliance CPCPGS4022 eLearning due before:14/08/2024   Face-to-Face Dates: 14-16 & 19- 22 Aug 2024 eLearning due before:14/08/2024

Class Time: 07:15 am ---- 03:30 pm

Bizmatrix DI Campus (Carneigie Vic) 3163 7 General Pricing $3,350.00   " Enquire Now " Button above 
MPGL-8-MEL-2024 Service Type A gas appliance CPCPGS4022 eLearning due before:11/09/2024   Face-to-Face Dates: 11 - 19 Sept 2024 eLearning due before:11/09/2024

Class Time: 07:15 am ---- 03:30 pm

Bizmatrix DI Campus (Carneigie Vic) 3163 8 General Pricing $3,350.00   " Enquire Now " Button above 
MPGL-9-MEL-2024 Service Type A gas appliance CPCPGS4022 eLearning due before:13/11/2024   Face-to-Face Dates: 13-15 & 18-21 November 2024 eLearning due before:13/11/2024

Class Time: 07:15 am ---- 03:30 pm

Bizmatrix DI Campus (Carneigie Vic) 3163 8 General Pricing $3,350.00   " Enquire Now " Button above 

Enquire now

This field is for validation purposes and should be left unchanged.
Scroll to Top